例如：
- $ifconfig dummy0 up
- $ifconfig dummy0 "192.168.1.190 netmask 255.255.255.0"
- dummy0 Link encap:Ethernet HWaddr b6:1f:f3:92:6d:20
- inet addr:192.168.1.190 Bcast:192.168.1.255 Mask:255.255.255.0
- inet6 addr: fe80::b41f:f3ff:fe92:6d20/64 Scope:Link
- UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:1050 (1.0 KiB)
> ifconfig
> ifconfig -a
> ifconfig dummy0
无
rmmod假人
因为虚拟仅用于示例目的.
如果没有办法做到这一点,我可以设置什么“扔掉”的IP并且可以避免任何麻烦？
喜欢
- $ifconfig dummy0 down
- $ifconfig dummy0 0.0.0.0
解决方法
冲洗ip：
- root@foo:~# ifconfig dummy0 192.168.55.1 netmask 255.255.255.0
- root@foo:~# ifconfig dummy0
- dummy0 Link encap:Ethernet HWaddr 5b:72:32:4f:92:c8
- inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0
- UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- root@foo:~# ip address flush dev dummy0
- root@foo:~# ifconfig dummy0 down
- root@foo:~# ifconfig dummy0
- dummy0 Link encap:Ethernet HWaddr 5b:72:32:4f:92:c8
- BROADCAST NOARP MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
